翡翠棋牌官网

井盖模具在使用和养护方面要有较大的规范性
发布人:管理员   发布时间:2019-6-10

井盖模具在使用和养护方面也有较大的规范性,模具在使用时,应轻拿轻放,地面上最好铺上一层稻草或者破袋子,放下的时候要从一边开始放下.

There is also a greater standardization in the use and maintenance of the well cover mould. When the mould is used, it should be handled lightly. It is better to lay a layer of straw or broken bags on the ground, and when it is laid down, it should be laid down from one side.


灌入混凝土的时候,保持模具的底部是平坦的,经震动平台震动的时候如果是批量生产要按一个方向排开,取下来的时候放在室内干燥的地方.

When pouring concrete, keep the bottom of the mould flat. If it is produced in batches, it should be arranged in one direction after shaking the platform. When it is removed, it should be placed in a dry place indoors.


脱模完成后,将模具的内壁外侧都要清理干净,因为钢制的模具在使用一段时间后表面就会磨损,各个零件也会脱落,所以要及时清洁处理,放在洁净的地方储备以便下次使用.

After the demoulding is completed, the inner and outer sides of the mould should be cleaned up, because the surface of the steel mould will wear and tear after a period of time, and each part will fall off, so it should be cleaned in time and stored in a clean place for the next use.

                                 


质量好的井盖模具,由于模具漏水效果比较好,在搅拌混凝土的时候也不需要放太多的水,这样一来,在很大程度上就提高了水泥件的干燥程度

The well cover mould with good quality does not need too much water when mixing concrete because of its good leaking effect, which greatly improves the drying degree of cement parts.


成型速度快了,生产量就会提高很多.所以客户在选择的时候要从多方面考虑,不能只注重价格因素,选择适合自己工程的模具产品才最重要.


As the forming speed is fast, the production will increase a lot. Therefore, customers should consider many aspects when choosing, not only pay attention to the price factor, but also choose the mould products suitable for their own projects.

光明棋牌APP下载 开元棋牌 天天乐棋牌APP下载 555棋牌手游中心 翡翠棋牌 宝赢彩票 光明棋牌 京都棋牌官网 555棋牌游戏官网 天天乐棋牌